Most shopping trips for gaming gear devolve into guesswork, especially when “all in one” can mean anything from a retro handheld to a home console dock. You want gear that actually fits your setup, whether that’s tossing a Switch 2 in a backpack for a commute or turning a shelf into a display. These six picks cover the bases: travel cases, a backpack, a wall mount, a LEGO collector’s set, and a flip-style retro handheld. Each one targets a different slice of the gaming life.
The Choices Worth Comparing
GeekShare Switch 2 Shark Carrying Case with 12 Card Slots
LEGO Super Mario World: Mario & Yoshi Building Set 71438
GeekShare Switch 2 Tricolor Cat Hard Case with 12 Card Slots
PGmoon Carry Backpack for Xbox Series X/S
TotalMount Wall Mount for Nintendo Switch 2
RG SP Flip Retro Handheld Console 3.4″ IPS 16GB
Meet The Standout Selections
Hard-shell cases for the Switch 2 tend to blur together, so the shark silhouette here stands out the moment it lands on a coffee table. The molded interior is cut for the 7.9-inch Switch 2, holding the console snug without forcing you to remove the Joy-Cons. Twelve game card slots tucked into the lid mean your whole current rotation travels in one place, a real upgrade over loose cartridges rattling around a backpack pocket.
You get the most out of this case tossing it into a daily commuter bag or a carry-on for a weekend trip. The shark zipper pull is a small touch, but it makes grabbing the case fast. Compared to the PGmoon backpack later in this list, this is the lighter, single-day option.
Strong Points
- Twelve built-in card slots replace the loose cartridge pouch habit
- Hard outer shell handles the bumps of a bus seat or overhead bin
- Form-fitted cut keeps the Switch 2 from sliding during a bumpy ride
- Distinctive shark shape makes the case easy to spot in a shared bag
Points To Note
- Limited room for bulky accessories like a Pro Controller or charging brick
- Hard shell adds bulk compared to soft pouches
Who It Suits Best
Daily commuters and travelers who carry a Switch 2 and a small stack of cartridges without extra accessories.
Look Elsewhere When
You haul a Pro Controller and a dock on every trip, in which case the PGmoon Carry Backpack for Xbox Series X/S is a roomier option, though obviously for a different console family.
This is the set that turns a corner of your desk into a tiny diorama of the SNES era. The build is pitched at adults (18+), so the part count and the pixel-art styling of Mario and Yoshi feel grown-up rather than kid-table. A crank at the base makes Yoshi run with Mario on his back, and a dial behind Yoshi’s head extends the tongue in and out, which is the kind of small mechanical reward that earns a second look every time you walk past it.
The set includes an Action Tag, so dropping a separately sold LEGO Mario, Luigi, or Peach figure on it brings digital reactions to life. You do not need that interaction to enjoy the build, but it’s there if you already collect the figures. Where the GeekShare cases solve a storage problem, this solves a “what do I put on the shelf” problem, a different but equally real slice of the gaming life.
Everyday Perks
- Crank and tongue mechanisms give the display real motion, not just a static build
- Pixel-art styling captures the SNES look without leaning on printed decals
- Action Tag slot adds a hook for expanding into the wider LEGO Mario figure line
Honest Caveats
- Interactive digital reactions require separately sold LEGO Mario, Luigi, or Peach figures
- Larger build footprint than a typical LEGO brick set, plan a dedicated shelf spot
Best Suited To
Adult Mario fans who want a display piece with moving parts and a few hours of relaxed building.
Skip It When
You came here looking for travel protection, in which case the GeekShare Switch 2 Shark Carrying Case is the more practical pick for daily use.
The tricolor cat version is the same idea as the shark case, with a tougher material story attached. A PU plus EVA composite shell handles drops and scrapes better than the typical fabric pouch, while the “crystal velvet” interior cushions the screen and Joy-Cons against sudden stops. The cut is built around the 7.9-inch Switch 2, so the console sits where it should without rattling.
Where this case earns its spot is the silicone cat ears, which double as a small kickstand. That trick is genuinely useful on a tray table or a hotel desk. Side by side with the shark case earlier in the list, the cat version leans more toward protection, while the shark leans more toward character.
What Earns Its Place
- PU plus EVA composite shell takes the hit during a backpack drop
- Soft interior lining guards the screen against scratches from card slots
- Twelve card slots keep the current rotation organized in one lid
- Cat-ear silicone stand supports tabletop play without a separate accessory
Small Caveats
- Cat-ear stand works best on flat surfaces, not great on a lap
- Slightly heavier than a soft pouch, worth knowing for minimalists
Who Should Grab It
Switch 2 owners who want a tougher shell than the typical case and like the idea of a built-in stand for travel play.
Key Specs
A Better Fit Elsewhere
You prefer a lighter, single-day case, in which case the GeekShare Switch 2 Shark Carrying Case earlier in this list is the trimmer option.
Console backpacks live or die on how they split up the load, and PGmoon designed the main compartment into two distinct rooms. The upper room swallows a headset, game cases, and cables without crushing anything. The lower room cradles the Xbox Series X or Series S console itself, accessible through a back zipper so you can pull the console out without unloading everything on top of it.
Heavy-duty nylon with PE foam padding through the body keeps the gear insulated from the usual backpack abuse. This is the right pick if your idea of portable Xbox means LAN parties, dorm-room moves, or a long hotel stay where the console rides in checked luggage. None of the Switch 2 cases earlier in the list come close to that carrying capacity.
Strengths Worth Knowing
- Two-room layout keeps the console separated from accessories, reducing scratch risk
- Back-zipper access to the console compartment saves unpacking time on arrival
- Heavy-duty nylon shell survives rough handling at airports and bus depots
- PE foam padding lines the interior, absorbing the everyday jolts of a long walk
Where It May Fall Short
- Backpack form factor adds bulk compared to a small handheld case
- Single-purpose design means it is not a great daily-driver backpack outside gaming trips
Made For
Xbox Series X or Series S owners who travel with the full console, headset, and a few games for multi-day trips.
Another Choice May Suit
You mostly need a protective shell for a Switch 2 in a commuter bag, in which case the GeekShare Switch 2 Tricolor Cat Hard Case handles that job in a fraction of the space.
Wall mounts for consoles tend to be an afterthought, but TotalMount built this one with heat management in mind, which matters more than people expect for a docked Switch 2. The mount fits Switch 2 docks only, identifiable by the large “2” printed on the front, and it does not work with first-generation Switch or Switch Lite docks. Mounting hardware is included.
This is the right pick when your TV is already on the wall and you have nowhere to put a dock on a stand. Owners commonly report that getting the dock off the floor also cuts down on dust and accidental kicks from pets. Compared to the LEGO display set earlier, this solves a hardware problem rather than a decor one.
Useful Touches
- Heat-aware design keeps the dock ventilation in play rather than boxed in
- Included mounting hardware removes the second trip to the hardware store
- Clean wall-mount finish turns the dock into a near-invisible part of the setup
Things To Consider
- Limited to Switch 2 docks, not compatible with first-generation or Lite models
- Requires drilling into a wall, so renters will want to check with a landlord first
Key Specs
Whose Shelf It Belongs On
Switch 2 owners with wall-mounted TVs who need the dock off the floor and want a tidy, low-profile install.
Swap It Out When
You actually want a tabletop display piece, where the LEGO Super Mario World: Mario & Yoshi Building Set 71438 fills a very different role on the same shelf.
Flip-style handhelds are having a moment, and the RG SP leans into that format with a strong hinge that locks at two preset angles, around 155 and 190 degrees, for tabletop play. The 3.4-inch IPS display is sharp for the size, and the Linux-based system supports more than 30 emulators covering everything from 8-bit classics through PlayStation-era titles. You bring your own ROM files; nothing is preloaded.
Connectivity covers the modern basics, with 5GHz Wi-Fi, Bluetooth, and HDMI output for a TV. The 3,300mAh battery is the kind of capacity that handles a cross-country flight without a recharge. This is the only pick in the list that runs its own games rather than protecting or displaying someone else’s console.
Where It Helps
- Flip form factor with two locked angles doubles as a tiny tabletop stand
- HDMI output lets the same device drive a TV for couch play
- 5GHz Wi-Fi plus Bluetooth covers modern wireless accessories and networking
- 30-plus emulator support spans multiple console generations on one device
Trade-Offs
- No preloaded games, so you need to source your own ROM library
- Small 3.4-inch screen can feel cramped for titles designed for bigger displays
The Right Fit
Retro gaming fans comfortable with loading their own game files and who want a pocket-sized emulation box with a flip design.
Reach For A Different Pick When
You actually want a carrying case for a Switch 2, in which case the GeekShare Switch 2 Tricolor Cat Hard Case earlier in this list is the proper match.
What Matters Most Before Choosing Alls In One Game Console Gear
Start with the console you already own. A Switch 2 case will not fit an Xbox, and a wall mount for one dock generation will not work with another. Mismatched gear is the most common reason accessories end up in a closet.
Compatibility and Fit
Match the case or mount to the exact model, not the family. The TotalMount wall mount, for instance, only works with the Switch 2 dock and will not seat the original Switch dock. Check the ASIN listings for model numbers and generation-specific notes before you order.
Materials and Daily Abuse
Hard PU or EVA shells absorb drops better than soft fabric pouches, but they add weight. For backpack commuters, the PGmoon backpack’s PE foam padding and dual-room layout is worth the extra bulk on longer trips. For daily carry, a hard shell with a soft interior like the GeekShare tricolor cat case hits a better balance.
Use Case Over Feature Lists
A wall mount, a hard case, and a flip handheld solve three different problems. Decide whether you need protection, display, or play first, then narrow the list. Owners who try to buy one product to do everything usually end up replacing it within a season.
Real-World Ownership
Plan for cleaning and storage. Hard shells wipe down with a damp cloth, fabric pouches collect lint, and wall mounts need occasional dusting around the vents. None of these are deal-breakers, but they shape which pick fits your home and habits best.
Key Considerations Across These Picks
Common Shopping Slip Ups
The single biggest miss is buying for the wrong generation. First-generation Switch cases will not fit the Switch 2, and a Switch 1 dock will not seat in a Switch 2 wall mount. Another trap is paying for a soft pouch when you actually need a hard shell, or vice versa, ending up with a case that is too bulky for a commuter bag. Match the protection level to the way you actually travel, not the way you imagine yourself traveling.
What The Higher Tier Buys
Higher-tier cases tend to swap fabric exteriors for composite shells, add card slot organization, and include a built-in stand. The LEGO set and the retro handheld are different kinds of upgrades: you are paying for build complexity and emulator breadth, not raw protection. Spend up when the extra features match a real habit, like carrying twelve cards or running your own emulation library, and skip the premium when the base model already covers the use case.
